Easy to install

Immediacy and speed of installation, creating sensational environments has never been so easy.

Unique design

Decorations that open up the vision of the space, enhancing the design of classic and modern environments.

Wide choice of materials

TNT, fibreglass, fabric, fabric-effect adhesive paper, technical solutions suitable for the living of private and public environments.

Customizable cards

Customize your order with dimensions and graphics designed especially for you

Natural TNT Wall effect

Download the technical sheet

The Wall Mural in natural TNT wall effect made of cellulose is 100% PVC free and eco-friendly. Fire resistant (certified B1), washable, and sound-absorbing, it can be used to set up commercial spaces and facilities in close contact with the public.

Thanks to its support in TNT, this Wall Mural is easy to apply with wallpaper glue and easily removable. It can be cleaned with warm water, soap, and a soft sponge, and the printed graphics are very resistant to wear. It does not generate shrinkage and the individual panels do not require overlapping; they can be applied next to each other on the substrate without any risk of subsequent separation.

The wall-effect material texture, pleasant to the eye and to the touch, enhances the beauty of the graphics and enriches every environment. Wall-effect non-woven fabric is ideal for personalizing the interiors of homes, showrooms, fairs, event venues, restaurants, hotels and many other environments.

Thickness (+/-) 330 mym, weight (+/-) 240 g/m2.

Ideal for: Hotels, bars, restaurants, bedrooms, corridors, living rooms, dining rooms, offices and commercial establishments


  • ecological
  • washable
  • sound absorbing
  • PVC free
  • stable and non-deformable
  • fire retardant (B1)

Embossed TNT

Embossed non- Wall Mural is the material solution that is pleasant to the touch and enhances the graphics. Thicker than plain paper, it is ideal for vintage images. TNT support with embossed finish coated in relief. Suitable for indoor use only. Application with vinyl paper glue.

Thickness (+/-) 390 µm, weight (+/-) 350 g/m2.

Ideal for: Hotels, bars, restaurants, bedrooms, corridors, living rooms, dining rooms, offices and commercial establishments


Download the technical data sheet

  • Washable
  • Breathable and anti-moisture
  • Sound-absorbing
  • 100% made in Italy
  • Water repellent
  • Green Guard certified water-based inks
  • Durable and UV-resistant
  • Scratch-resistant

Eco-sustainability without sacrificing aesthetics

For a perfect installation it will be advisable to organize all the necessary material and specific tools for the application of the wallpaper so as not to find yourself unprepared during the work phases.

Here is a list of essential tools: Cutter knife Pencil, Bucket, Tape measure Level, brush, Screwdriver Brush for glue, Ruler, Spatula, Roller.

Prepare the support

Remove the old coating quickly and easily with a debonding product and a spatula: prepare the surface to perfection

Make sure the wall is completely clean and dry, fill the holes and sand any imperfections until the surface is smooth

Using a screwdriver, remove all the switches and electrical socket plates

Take measurements

Prepare the Wall Mural glue by mixing evenly and carefully respecting the proportions indicated on the package

Use the plumb line and make reference marks on the wall, this will allow you to adjust the positioning of the sheet during installation.

Make sure that the graphics match and then trim the bleed if necessary. To avoid misalignments we recommend cutting the sheets as the installation progresses.

Prepare the pose

Spread the glue directly on the wall using a roller or brush, covering the entire width of the roll using the lines drawn during preparation as a reference.

Place the first sheet on the wall starting from the top and leave an excess of 5 cm. Check that the sheet matches the reference lines drawn previously

Using a stiff spatula, adhere the entire sheet to the wall. Using smooth movements, start from the center and push the excess glue towards the ends

Using a spatula and cutter, trim the excess flush with the skirting board and the ceiling in the upper part

Lay the second sheet next to the first, paying attention to the alignment before adhering it to the wall. Carefully smooth out the joint area using a damp sponge to squeeze out excess glue

Some air bubbles may appear following installation, which should deflate on their own. If they persist you can pierce them with a pin and inject glue with a syringe inside the bubble.